MAISHI MANUFACTURE(GROUP) LIMITED.

wire mesh bolting cloth

wire mesh bolting cloth
wire mesh bolting cloth
wire mesh bolting cloth
wire mesh bolting cloth
wire mesh bolting cloth

MAISHI MANUFACTURE(GROUP) LIMITED.

Add:NO.230, NORTH YOUYI ROAD, SHIJIAZHUANG CITY, HEBEI, CHINA

Tel:0086-311-89277936

0086-311-89277937 0086-311-89277938 0086-311-89277939 0086-311-86702978 0086-311-88890465

Fax:0086-311-85861285

Email:wire meshinfo@chinawiremesh.info wire meshsales@chinawiremesh.info
Caution linear vibrating screen mesh installation
Time:2015-06-06

    Line screen loaded selection screen just to install it or not as well as the details and techniques and the use of a direct impact on the durability of the effect of the screen, below the Xinxiang City vibration Machinery Co., Ltd. Han explained one by one technician linear shaker screen selection and precautions installation.

1 Note Be sure to select wire diameter coarse sieve sieve sieve straight line because the installation is relatively cumbersome.

2 When cutting screen width and grid can be consistent in length than the grid must grow 50 ~ 70mm.

3 When installing be sure to screen tension, because the sieve tensioner degree is an important factor affecting the screening efficiency.

4 Installation of clear net Pinball be sure to pay attention to consider the difficulty of screening and mesh material, not blindly install.

5 If a large proportion of the material or higher sieve size should be increased in the following screen mesh for the care network, which aims to play a supporting role, to reduce the pressure on the material screening network, extending its life.

6 Truss assembly as required to post the screen box, remember to grow screen extends into the corresponding spout, avoid mixing occurs in this phenomenon.

7 When installing the pressure plate, must pay attention to its flatness, and lined with strong scalability sponge sealed with screw down, because it is both the key to prevent the occurrence of mixed-level, but also an important factor affecting the life of the screen.

8 Installed, you should use a little material on the screening machine fabrics and conduct screening tests, even if the material is fed forward and grading accuracy, no mixing phenomenon, then you can put to use; the other hand, if there is deviation or poly heap and so uneven, adjust the flatness and uniformity of the surface mesh sieve machine; if there is mixed-level phenomenon, should check whether the screen and pressing the seal.

Copyright 1996-2016 - MAISHI MANUFACTURE(GROUP) LIMITED. - all rights reserved  冀ICP备08102530号  sitemap

Share to: