What about the key points for selecting flour mesh?...

The surface of the stainless steel Bolting Cloth is bleached and various acids are attached. Rinse immediately with water, dip with ammonia solution or neutral carbonated soda solution, and wash with neutral detergent or warm water.

The stainless steel Bolting Cloth has a rainbow pattern on the surface, which is caused by excessive use of detergent or oil. It can be washed with warm water detergent when washing. The rust caused by dirt on the 

surface of stainless steel Bolting Cloth can be washed with 10% nitric acid or grinding detergent, or it can be washed with special washing drugs. As long as we use the correct maintenance method, we can extend the service life of stainless steel Bolting Cloth and keep it clean, bright and gorgeous.

The part of the stainless steel Bolting Cloth surface passivation film with weak corrosion resistance forms a pitting reaction due to the self-excited reaction, and generates small holes, and the chloride ions are close to form a strong corrosive solution to accelerate the corrosion reaction rate. There is also intergranular corrosion cracking inside the stainless steel, all of which destroys the passivation film on the stainless steel Bolting Cloth surface. Therefore, the stainless steel Bolting Cloth surface must be regularly cleaned and maintained to maintain its gorgeous surface and extend its service life. When cleaning the stainless steel Bolting Cloth surface, care must be taken not to cause surface scratching. Avoid using bleaching ingredients and abrasive cleaning liquids, steel balls, grinding tools, etc. To remove the washing liquid, rinse the surface with clean water at the end of washing.