What about the key points for selecting flour mesh?...

Filter bags for liquids is an industrial application that can be applied to chemical catalyst recovery, filtration of alkaline and acidic liquids as well as solvents, emulsions and dispersions, acrylic and viscose emulsions. In the fine chemical industry, activated carbon or catalyst removal is a typical example of a high standard of applications in chemical processing. The singular filter bag not only meets the requirements of high-efficiency filtration, but also prolongs the service life and improves reliability.

As consumers should understand the classification of Filter bags for liquids

1. Steel ring needle felt line seam filter bag uses standard special filter material for famous factory. The filtrate filter surface is treated with special singeing, which effectively prevents the fiber from separating from the contaminated filtrate, and avoids the traditional roller pressure treatment. Excessive clogging shortens filter bag life. All raw materials are white, without any special bleaching treatment, fully comply with environmental protection standards, and because of the three-dimensional filter layer of needle felt, when the liquid flows through the needle felt, the particles will stay on the inner wall of the liquid filter bag due to the deep filtration mechanism. Surface and depth, high capture efficiency for solid or colloidal particles. The uniform thickness of the needle felt, the stable opening ratio and the sufficient strength make the filter bag stable and the application time is longer.

2. Nylon single mesh bag Sewing with high quality nylon single screen, each wire is welded and welded to increase its strength, so that the wire will not be offset under pressure. The filter bag seam is subjected to tensile treatment and the bag steel ring is strengthened and sealed. By using the surface filtration principle, the nylon single mesh filter bag isolates the particles in the filtrate larger than the mesh, and is matched with an appropriate filter device, which can effectively The ground has the ideal filtering effect.

3. Plastic ring full hot melt welding filter bag In addition to the above characteristics, the bottom, side and collar ring connect

ion methods of the filter bag are welded by hot melt method. Due to the problem of side leakage caused by pinholes and uneven material, the problem of fiber shedding is solved by such a full-heat-welded filter bag, which is suitable for use in higher-demand industries.

4. The oil absorption filter bag is composed of a filter felt cloth, an oil absorption layer and a protective mesh layer. It is specially designed for certain industries, such as automobile manufacturing, component manufacturing, chemical process, wastewater treatment and metal casting industry. Oil can be removed, and particles of different sizes can be filtered out as needed.

Through Filter bags for liquids, whether it is a lot of industrial applications such as chemical filtration, the description is very wide, the product quality is also the comparative advantage of many filtration products. It is not a single can have a lot of classification. A lot of classifications like oil filter bags. When you choose, you can choose the right one from the category, performance, etc.