What about the key points for selecting flour mesh?...

Nylon mesh refers to a nylon mesh. It can be understood as a kind of cloth with good ductility and strong air permeability. Can be used to make the upper part of some special mesh shoes we often wear. Or the inner lining of the clothes can be used.

The advantages of nylon mesh are numerous:

1. High mechanical strength, good toughness, high tensile and compressive strength. The specific tensile strength is higher than that of metal, and the compressive strength is comparable to that of metal, but its rigidity is not as good as that of metal. The tensile strength is close to the yield strength and is more than twice as high as ABS. It has strong absorption capacity for impact and stress vibration, and its impact strength is much higher than that of ordinary plastics, and it is superior to acetal resin.

2, the fatigue resistance is outstanding, the workpiece can maintain the original mechanical strength after repeated bending. PA is often used in the occasions where the escalator handrails and the new bicycle plastic rims are extremely fatigued.

3, high softening point, heat resistance (such as nylon 46, high crystalline nylon high heat distortion temperature, can be used at 150 degrees for a long time. PA66 after glass fiber reinforced, its heat distortion temperature reached 250 degrees or more).

Usually nylon mesh will be applied to a variety of professional sports shoes, such as running shoes, tennis shoes and so on. Wearing nylon mesh shoes is fashionable and comfortable, and the mesh vents can let the moisture of the feet exude at any time, thus keeping the shoes dry.

The nylon mesh is designed as a mesh venting hole, so that dust particles in the air and some visible sand enter the mesh cloth, which brings inconvenience to the cleaning of the nylon mesh shoes. If it is a large amount of sand, you can put the shoes upside down before cleaning, and tap the sole with a brush handle to make the sand fall out, then wash it, it is not easy to damage the nylon mesh; if it is only some dust, The shoes can be immersed in water and placed in the water for half an hour.