What about the key points for selecting flour mesh?...

1. Polyester Bolting Cloth before the net paper machine calibration, the rollers rotate flexibly. Put the polyester Bolting Cloth into the use workshop one week in advance. To adapt to temperature changes.

2. Avoid contact with sharp edges and corners on the polyester mesh. Do not smoke or open fire near the polyester mesh.

3. The use temperature of polyester net shall not exceed 150°C, the tension of single-layer polyester molding net shall be controlled at 40-50N/cm, the tension of polyester forming net above double-layer shall be controlled at 60-70N/cm, and the tension of polyester dry net shall be controlled. In 15N-25N/CM.

4. Polyester Bolting Cloth storage conditions: temperature about 20 °C, relative humidity of about 50%. Due to the different temperature, humidity and storage time in different regions, the length dimension of the polyester net will change, try to be the first to go to the polyester The net first. Polyester net in the initial operation of the 24-28 hours, there will be a certain degree of elongation, this process should pay attention to adjust the polyester mesh tension, after which will be stable.

5. Due to the special nature of polyester net raw materials, please pay attention to the scientific use of cleaning agents when cleaning polyester Bolting Cloth. Chemical cleaning must use neutral or 5% cold lye with a soft bristle brush, and then rinse immediately with clean water.

Main products: Bolting Cloth, Polyester Bolting Cloth, Nylon Filter Cloth, Polyester Filter Cloth, Polyester Mesh Belt, Polyester Conveyor Belt,Polyester Mesh Transport Tapeand so on.